Idx TA-PV2J65 User Manual download pdf

TA-PV2J650

V-Mount Adaptor for JVC GY-HM650/600

Instruction Manual

Thank you for choosing the TA-PV2J650. Designed specifically for use with the JVC GY-

HM650/600, the TA-PV2J650 attaches directly to the IDX A-CP(A) universal mounting plate, or

other 3

party manufactured mounting plates and shoulder mounts. Please check which fixing

positions are required for 3

party plates and use the appropriate location holes. The TA-

PV2J650 incorporates an integral IDX V-Mount plate allowing direct mounting of any IDX

ENDURA battery. To install, simply connect the DC power output cable to the DC-IN connector

of the camera. The TA-PV2J650 has a D-Tap DC-OUT connector that supplies power directly

from the battery allowing the use of professional on-board camera lights or other accessories.

Please note, this is an unregulated output.

Specifications

Dimensions: 82.5(w) x 142(h) x 12(d) mm

Weight: 210g approx.

Cable output voltage: 12V

D-Tap output voltage: 12~17V (Unregulated)

Maximum output for D-Tap: 50W

Cable length: 1.7m approx.

Included accessories: (4) M3 x 8 screws

General Notes & Safety

Do not attempt to open or modify this unit. All work should be carried out by IDX authorised

service personnel only.

Do not attach the TA-PV2J650 to any non-compatible video camera or equipment as it may

cause defect, damage or other incidents. Please read this Instruction Manual carefully before

use.

When connecting a battery or adaptor to the TA-PV2J650, be sure to connect firmly. If it is not

attached properly, it may result in loss or damage to the unit or even injury to the user.

Do not expose to, use or place the unit in direct sunlight, extreme dust or other hazardous

environments.

A short between the plus (+) and minus (-) charge pins may cause fire, electrical shock or other

incidents.

Stop using immediately in case of abnormal smell, leak, color change or deformity during use.

If you need any inspection or repairs, please contact your local IDX dealer or IDX office.

IDX System Technology, Inc.

19001 Harborgate Way, Suite 105 Torrance, CA 90501

Tel: +1-310-328-2850

Fax: +1-310-328-8202

Email: [email protected]

www.idxtek.com

05032013